Prerequisites
What you need before using Pedro Pathing with ElectroDromos
ElectroDromos runs on top of Pedro Pathing, so you need everything Pedro needs, plus a recent enough Pedro.
Holonomic Drive
You have some kind of holonomic drivetrain. Pedro Pathing supports Mecanum and Swerve out of the box, but any holonomic drivetrain could be used. ElectroDromos works with any Pedro Drivetrain.
Localization
The robot needs a way to know where it is on the field. Pedro Pathing supports Pinpoint, OctoQuad, OTOS, Two Wheel, Three Wheel, and Three Wheel IMU. ElectroDromos works with any Pedro Localizer.
Pedro Pathing 3.0.1 or newer
ElectroDromos needs Pedro Pathing 3.0.1 or newer and Pedro's tuning module 1.0.1. Pedro 2 and early Pedro 3 alphas are not supported. See Upgrading to Pedro 3.
REV hubs
Voltage compensation reads the battery through the hub's voltage sensor.
FTC SDK 11.2 or newer
ElectroDromos is built against FTC SDK 11.2 and tested with 12.0.
Programming Platform
You must use Android Studio. Pedro Pathing and ElectroDromos do not work with OnBot Java or Blocks.
Next Steps
Once you have all of these, proceed to installation.
Last updated on